Part Numbers and Ordering
Standalone Units
The Certus is available in a few different variants. Part numbers for the unit and it's evaluation kit are listed in the following table.
| Part - Standalone Unit | Part - Evaluation Kit | Description |
|---|---|---|
| CERTUS-EVO-X20P-BLK | CERTUS-EVO-X20P-BLK-EK | Certus Evo INS with black housing and GNSS/INS Unit with Ublox X20P GNSS receivers |
| CERTUS-EVO-MX5-BLK | CERTUS-EVO-MX5-BLK-EK | Certus Evo INS with black housing and GNSS/INS Unit with Septentrio Mosaic X5 GNSS receivers |
| CERTUS | CERTUS-EK | Certus INS with Ublox F20P GNSS Receivers |
| CERTUS-BD992 | CERTUS-BD992-EK | Certus INS with Trimble BD992 GNSS Receivers |
Standalone Unit Part Numbers
Evaluation Kits
Certus Evaluation Kit transport case
Each evaluation kit includes a Certus unit, along with the accessories needed to set up and connect the unit. Accessories may be purchased separately.
Included accessories are listed in the table below.
| Part Number | Description | CERTUS-EVO-X20P-BLK-EK | CERTUS-EVO-MX5-BLK-EK | CERTUS-EK | CERTUS-BD992-EK |
|---|---|---|---|---|---|
| G5ANT-53A4T1 | Antcom L1/L2 RTK Antenna | 2 | 2 | ||
| CALIAN-POLE-MOUNT | Pole mount bracket for Calian Antennas Black. Powder coated steel | 2 | 2 | ||
| Calian TW3990XF-G | Calian TW3990XF Full Band GNSS + L-Band (separate ground plane) dark gray, TNC connector | 2 | |||
| Calian AJ977XF | Calian SSL990XF Anti-Jam Multi-Constellation Triple-Band Antenna with TNC connector | 2 | |||
| CABLE-FTDI | FTDI USB to RS232/RS422 (switchable) 1m cable | 1 | 1 | 1 | 1 |
| CABLE-PPC-16-BREAKOUT | Cable push-pull circular 16 pin breakout 2 m | 1 | 1 | 1 | 1 |
| CABLE-PPC-8-BREAKOUT | Cable push-pull circular 8 pin breakout 2 m | 1 | 1 | 1 | 1 |
| BF046WS180427-03 | SMA to TNC 4m cable | 2 | 2 | 2 | 2 |
| PPC-DUSTCAP | Blanking cap push-pull circular (single cap) | 1 | 1 | 1 | 1 |
| SUPPLY-24V | 24V DC Power Supply | 1 | 1 | 1 | 1 |
| BOREAS90-KIT-CASE | Certus / Boreas EK Case | 1 | |||
| CERTUS-EK-CASE | Certus EK Case | 1 | 1 | 1 |
Evaluation Kit Part Numbers
GNSS Receiver License Upgrades
These licenses are only applicable to units with a Trimble BD992 GNSS Receiver, variants: CERTUS-BD992 and CERTUS-EVO-OEM-BD992.
| Part Number | Description |
|---|---|
| BD992-LIC-10CM | Upgrade Trimble BD992 GNSS Receiver from 30 cm to 10 cm RTK accuracy. |
| BD992-LIC-8MM | Upgrade Trimble BD992 GNSS Receiver from 30 cm to 8 mm RTK accuracy. Add Galileo and BeiDou constellations. |
Ordering Part Numbers for GNSS Receiver Licence Upgrades
Accessories
| Part Number | Description |
|---|---|
| CABLE-PPC-16-UNT-3M | Certus 3 m cable with 16-pin plug and unterminated connectors |
| CABLE-PPC16--UNT-10M | Certus 10 m cable with 16-pin plug and unterminated connectors |
| CABLE-PPC-8-UNT-3M | Certus 3 m cable with 8-pin plug and unterminated connectors |
| CABLE-PPC-8-UNT-10M | Certus 10 m cable with 8-pin plug and unterminated connectors |
| MOUNT-SUCT | Suction cup 5/8" GNSS antenna survey mount for easy installation of GNSS antenna on vehicles |
| VSP6337L | Tallysman VeroStar GNSS Antenna - L1/L2/L5 plus L-band, pole mount, TNC Female connector |
| CAR12VPWR | Car auxiliary power supply to DC jack power supply |
| OBDII-ODOMETER | OBDII Odometer Interface |
Ordering Part Numbers for Accessories